Table of Contents
Advertisement
Initializing the PenWare 1500
Use the PenWare Initialization Program (PWINIT) on the PenWare Utilities Diskette v4.3
shipped with the terminal to configure the PenWare 1500.
To install and run the PenWare Initialization Program:
1. Insert the PenWare Utilities Diskette in the disk drive (usually drive A or B) on the
host computer.
2. Select Run from the Start menu.
3. Select Browse and locate the diskette drive.
4. Double-click on Setup.
5. Click OK.
6. Select Yes to launch the PenWare Initialization Program (PWINIT).
7. Click on Finish.
8. Perform the functions described in the following sections (calibrating the PenWare
1500 screen and setting LCD Clear Time) using PenWare Initialization Program.
Chapter 3
3-1
Advertisement
Table of Contents
