Table of Contents
Advertisement
PenWare 1500 Product Reference Guide
7. Power on the POS host device.
PenWare 1500
Mouse
The screen lights and the Penware 1500 logo displays for 3 seconds.
The green LED blinks while the terminal is searching for the host, then turns solid
green when the host is found.
Note: To enable the terminal to recognize the host, install and run the
PenWare Initialization Program located on the PenWare Utilities
Diskette. This program tests the host and terminal connection, and
calibrates the signature pad if necessary. See the
Initializing the PenWare 1500
2-4
PS/2 Cable
Figure 2-2. PS/2 Cable Configuration
HDB15 Connector
DB9
Connector
for more information.
Host Device
Serial Port
Mouse Port
Chapter 3,
Advertisement
Table of Contents
