Roland TurboStart VS-880 Supplemental Notes page 17

NQPSMTR
MSQ-100
MSQ-700
MT-32
MT-80s
MT-100
MT-120
MT-120s
MT-200
MV-30
OCTAPAD
OCTAPAD II
P-55
P-330
PAD-8
PAD-80
PC-150
PC-200
PC-200mkII
All PIANO PLUS
PK-5
PLANET-P
PLANET-S
PM-16
PMA-5
PR-100
PRO-E
R-5
R-8
R-8mkII
R-8M
R-70
© 1997 Roland Corporation U.S.
No ROM reset.
No ROM reset.
While holding MASTER VOLUME, press RHYTHM PART. Press PART 1.
The unit resets each time you turn it on.
While holding STOP, press DELETE. After the display flashes ALL CLEAR, press
EXECUTE.
Power on while holding REPEAT, SONG (blue button), and PLAY. Press FWD repeatedly,
until the window reads T-13. Press PLAY, then press REC. Power off, then on.
Power on while holding REPEAT, SONG (blue button), and PLAY. Press FWD repeatedly,
until the window reads T-13. Press PLAY, then press REC. Power off, then on.
Power on while holding REPEAT, SONG (blue button), and PLAY. Use the DIAL to select
T-15 in the window. Press PLAY, then press REC. Power off, then on.
(Same as STUDIO M.) No ROM reset.
(Same as PAD-8.) Power on while holding MIDI CH and NOTE NUMBER. Power off and
then back on.
(Same as PAD-80.) Power on while holding both VALUE (solid < and >) buttons.
Power on while holding both INSTRUMENT buttons, then press PARAM 1.
No ROM reset.
(Same as OCTAPAD.) Power on while holding MIDI CH and NOTE NUMBER. Power off,
then back on.
(Same as OCTAPAD II.) Power on while holding both VALUE (solid < and >) buttons.
Power on while holding COMMAND on the left edge of the keyboard.
Power on while holding the two buttons under the word STANDARD.
Power on while holding the two buttons under the word STANDARD.
(Same as some of the HP-Series.) No ROM reset.
Power on while holding OCT/PARAM .
(Same as MKS-10.) No ROM reset.
(Same as MKS-30.) No ROM reset.
Power on while holding NUMBER buttons 1 and 2. (This reloads the first BANK of
settings.)
Press UTILITY, then press the RIGHT (>) cursor button repeatedly to select INITIALIZE.
Press ENTER, then [EXEC].
The unit resets each time you turn it on.
Power on while holding WRITE.
Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
Power on while holding ENTER and the RIGHT (>) CURSOR button, then press ENTER
twice.
Power on while holding MIDI and ASSIGN, then press YES twice.
Re-initialization Procedures
Supplemental Notes
Page 6 of 9