Roland TurboStart VS-880 Supplemental Notes page 13

NQPSMTR
DM-Series
DR-5
DR-550
DR-550mkII
DR-660
DS-330
E-5
E-10
E-12
E-14US
E-15
E-16
E-20
E-28US
E-30
E-35
E-36
E-38
E-56
E-66
E-68US
E-70
E-86
E-96
E-500
EM-101
EM-303
EM-305
ep-3
ep-5
ep-7
ep-7mkII
ep-9
ep-85/95
ep-707
All Other EP
FC-100
© 1997 Roland Corporation U.S.
No ROM reset.
Power on while holding FRET LEFT (<) and RIGHT (>), then press ENTER twice.
Power on while holding -1 and +1 , then press START.
Power on while holding -1 and +1 , then press START.
Press UTILITY, then use LEFT (<) and RIGHT (>) to select [8] INIT. Press ENTER twice.
Power on while holding REVERB and SPLIT, then press YES.
No ROM reset.
Power on while holding WRITE.
No ROM reset.
The unit resets each time you turn it on.
The unit resets each time you turn it on.
The unit resets each time you turn it on.
Power on while holding WRITE.
The unit resets each time you turn it on.
Power on while holding WRITE.
Power on while holding REC/PUNCH IN.
Power on while holding RECORDER.
The unit resets each time you turn it on.
Power on while holding WRITE.
Power on while holding REC in the DISK RECORDER section.
Power on while holding WRITE.
Power on while holding WRITE.
Power on while holding WRITE.
Power on while holding WRITE.
Press UTILITY. Use the buttons under <<PAGE>> to select FACTORY PRESET. Press
EXECUTE, then press OK. When screen shows RESET COMPLETE, power off, then on.
No ROM reset.
The unit resets each time you turn it on.
The unit resets each time you turn it on.
The unit resets each time you turn it on.
While holding REC and PLAY, press STRINGS. Power off and then back on.
While holding REC and PLAY, press STRINGS. Power off and then back on.
While holding REC and PLAY, press STRINGS. Power off and then back on.
While holding REC and PLAY, press CHOIR. Power off and then back on.
The unit resets each time you turn it on.
No ROM reset.
No ROM reset.
Re-initialization Procedures
Supplemental Notes
Page 2 of 9