Table of Contents
Advertisement
Quick Links
INSTALLATION
INSTRUCTIONS
SHOWER
Englefield has a history
of making superb showers
and their popularity is
testament to their quality
and affordability.
It's the details that Englefield
cares about - from pioneering
the latest technology, to
innovative design, it's all to
make your showering
experience the very best it
can be.
1199134-A02-H
28/11/2019
EXCLUSIVE SERIES
Round Sliding
Note: Tapware and accessories are not included.
Handles may di er from those pictured.
Engle eld
Advertisement
Table of Contents
Related Manuals for Kohler ENGLEFIELD EXCLUSIVE Series
Summary of Contents for Kohler ENGLEFIELD EXCLUSIVE Series
- Page 1 INSTALLATION INSTRUCTIONS EXCLUSIVE SERIES SHOWER Round Sliding Englefield has a history of making superb showers and their popularity is testament to their quality and affordability. It’s the details that Englefield cares about - from pioneering the latest technology, to innovative design, it’s all to make your showering Note: Tapware and accessories are not included.
-
Page 2: Installation Instructions
EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN Before installing the shower please read these instructions carefully to familiarise yourself with the required tools, materials and installation sequences. Please leave these instructions for the consumer after installation. Refer to the separate care and maintenance guide for important care and cleaning information. -
Page 3: Construction Requirements
EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS CONSTRUCTION REQUIREMENTS ATTENTION Due to the weight of the shower system Englefield strongly recommends constructing double studs (as below) to fix the wall retainers to. Wall Framing Rough-In For Acrylic tray/base Size Dim ‘A’ Dim ‘B’... -
Page 4: Parts Identification
EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS PARTS IDENTIFICATION Stopper Screw ST 3.9 x 12mm Left door stop Right door stop Top and bottom rail Top and bottom rail seal* Corner cover top right Corner cover, top left Clip screw Door entry seal Wall retainer ST 4.2 X 9.5 mm... - Page 5 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS 1 - INSTALLATION Caution: Ensure tray/base or tiled (b) Align a wall retainer with mark on tray/ floor is level & walls are vertical & base with tab facing inwards. Use a square. level to make sure it is upright. (This is critical to ensure correct operation of the door).
- Page 6 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS 2.2 Return Glass (d) Press fit the top rail to the top end of both glass panels. NOTE: Make sure that the glass panels align with (a) Make sure there are seals in each end the end of the rails.
- Page 7 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS (f) Fix the top and bottom rails to the glass (b) Cut the return seals to length leaving a panels. Use a power drill on a low torque 3-5mm notch at the bottom so that the setting to drive 8 countersunk screws fexible tab overlaps the curved still into the top and bottom rails.
- Page 8 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS (b) Make sure that the edges of the return 2.5 Door Panels glass panels are vertical. (a) Identify the door - Left or right hand. (refer to handle location). Note: The rollers on the top edge are height adjustable.
- Page 9 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS Profile Seals 2.6 Door Seals 2.7 Handles (a) Press fit the door seals onto the vertical edges of the doors with the flap facing (a) Follow the instructions supplied with outwards. the handles. 2.8 Shower Sealing (a) Thoroughly clean all surfaces.
-
Page 10: Installation Complete
EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS 2.9 Door Entry Seals (a) Press fit the door entry seals into the channel in the top side of the bottom rail, and the underside of the top rail. Seals 2.10 Covers (a) Press fit all 4 corner covers over the corner cover clips. - Page 11 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS Spare Part Image Description Codes Fixing kit - round sliding 1102939-0 Englefield - 4 x plastic wedges, 6 x wall anchors, 6 x screw caps, White 6 x 30mm screws, 4 x 12mm screws & 8 x 20mm screws 1102939-GY Englefield Grey...
- Page 12 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS Spare Part Image Description Codes 1412485 Englefield Glass - Return - 900 x 900 1930 shower - 1 x shower return glass (CleanLess coat) for 900 x 900 shower 320mm 1412486 Englefield Glass - Return - 1000 x 1000 1930 shower - 1 x shower return glass (CleanLess coat) for 1000 x 1000 shower 420mm...
- Page 13 EXCLUSIVE SERIES Round Sliding INSTALLATION INSTRUCTIONS Spare Part Image Description Codes 1102941-T-0 Profile Wall retainer - Return Englefield White 1930mm - 1 x return wall retainer 1102941-T-SHP Englefield Metallic 1930mm 1102941-T-SS Englefield Satin 1930mm Seal - Wall retainer - round sliding 1102944-T Profile Englefield...
-
Page 14: Cleaning And Maintenance Instructions
- Please refer to our website for cleaning instructions. CONTACT AND WARRANTY INFORMATION - For contact information, please refer to the Home Owner’s Guide. - For warranty and other information, please visit our website. NEW ZEALAND AUSTRALIA KOHLER NZ LTD KOHLER AUSTRALIA www.englefield.co.nz www.englefield.com Engle eld...