Pump Cleaning - Server CP-MEC3 Manual

PUMP CLEANING

1
FLUSH & RINSE
all pump surfaces with hot water.
Place lower end of pump into container
of hot water and operate pump until all
remaining product is expelled and only hot
water is discharged.
DISASSEMBLE & CLEAN
2
all washable parts with soap and hot water.
(See DISASSEMBLY on page 3.)
USE SUPPLIED BRUSH
to thoroughly clean inside discharge
tube and any confined areas.
RINSE
3
fully with clean water.
SANITIZE
4
all parts according to local sanitization
requirements. All parts in contact with food
must be sanitized.
5
AIR DRY
all parts fully.
GOLD LID CLEANING
HAND WASH ONLY
with mild detergent solution.
Finish of gold lid may fade if exposed to
harsh chemicals.
Page 4
YES!
Use dishwashing
soap, hot water
and nylon brush.
Pump is dishwasher safe.
Lid: Hand Wash Only.
Do not use caustic cleaners or cleansing agents
with high concentrations of acid, alkaline or
chlorine. These agents can cause the finish to fade.