Icom IC-7100 Instruction Manual page 81

"TO" (Destination) setting (Continued)
D
The destination station call sign can be directly input.
Directly input the call sign "JM1ZLK."
Push (C) to select the DR mode.
q
DR
Check whether or not "TO" is selected.
w
Touch the "TO" field.
e
Touch [ Z] to display the next page.
r
Touch "Direct Input (UR)."
t
Touch the desired block one or more times to
y
the desired character or symbol.
(Example: J)
"AB⇔12" to toggle between the Alphabet input
and Number input mode.
D) to delete the selected character, symbol
or number.
" to input a space.
Touch [ f](D) to move the cursor backwards, or
u
touch [g](D) to move the cursor forwards.
Repeat steps y and u to program a call sign of
i
up to 8 characters, including spaces, and then touch
[ENT](D).
(Example: First, J, then M, then 1, then Z, then L,
then K.)
1ZLK" is displayed in "TO."
DIRECT INPUT (UR) screen.
PUT (UR) screen, until inputting a new call sign.
If the programmed call sign is duplicated in "Your Call
Sign" memory, the name is displayed. (Only when the
name has been programmed.)
L eft D isplay
C enter
select
"TO" is selected.
-
-
"JM1ZLK" is set in "TO."
5-19
D-STAR OPERATION <BASIC>
The L, R, C or D in the
R ight
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
5
Touch
"TO."
Touch
[Z].
Touch
" Direct Input
(UR)"
Program a call
sign, and touch
[ENT].