Icom IC-7100 Instruction Manual page 17

Rear panel
q w e r
q
Plug in standard stereo headphones (impedance: 8
to 16 ).
ø
and any external speaker, are disabled.
is set to the SPEAKER position, an external speaker can
be used instead of headphones. This is convenient for
mobile or outdoor operation.
w
Plug in a bug or paddle type key to use the internal
electronic keyer for CW operation. (AI sec. 4)
key in the "Keyer Type" item of the "KEYER SET" mode.
selected in the "Keyer Type" item of the "KEYER SET"
mode. (AI sec. 4)
on pages 1-15 and 2-5.
in the "Paddle Polarity" item of the "KEYER SET" mode.
AI sec. 4
( )
venience. (AI sec. 4)
A standard 3.5(d) mm/
Speaker
ø load.
y) on the bottom panel
(dot)
(com)
(dash)
⁄ inch plug
1
8
Bottom panel
y
t
e
Plug in the supplied or an optional microphone.
8-pin microphone such as the SM-30 or SM-50.
unit.
DO NOT simultaneously connect two microphones.
r
Connects to the Main unit using with the supplied
OPC-2253 Control cable.
long.
DO NOT use any third party's Ethernet
t STAND
The length of the stand can be adjusted in two
steps.
the Front panel.
y
-
Selects the [PHONES/SP] jack to connect a Head-
phones or external speaker.
u SCREW HOLE FOR STAND
Accepts the screw of a tripod stand. (Third party
product.)
i
Accepts the screws of the optional MBA-1 Controller
bracket.
Mounting base.
1-13
PANEL DESCRIPTION
u i
cables.
not to incline back when you operate
1