Transmit Led - Icom IC-7100 Instruction Manual

D
(Option)
q
SPEECH KEY Operation (p. 3-20)
Push to audibly announce the S-meter level, the
displayed frequency and the operating mode.
"S-Level SPEECH" item of the "SPEECH" Set mode.
(p. 6-4)
> SPEECH > S-Level SPEECH
SET
frequency announcement.
LOCK KEY Operation (AI sec. 5)
Hold down for 1 second to turn the Lock function
ON or OFF.
" appears when the function is ON.
"Lock Function" item of the "Function" Set mode (p.
6-6).
> Function > Lock Function
SET
w
Hold down to transmit, release to receive.
Y Z
e
Change the operating frequency.
is 50 Hz.
q
w
e
r
t
(p. 3-23)
SPCH TUNER
XFC
/LOCK /CALL
MW
V/M
F-2
F-1
Mic element
1.8 3.5 7
MODE
1 2 3
10 14 18
FIL
y
4 5 6
21 24 28
GENE
7 8 9
50 . 144 430 F-INP
0
CE ENT
r TRANSMIT LED
Lights red while transmitting.
t
Pushing a key selects the operating band.
Pushing the same key 2 or 3 times calls up other
stacked frequencies in the band.
quencies in each band.
After pushing
quency, then press
y
Push to select one of three IF filter settings.
are displayed for 2 seconds in the window.
Push for 1 second to display the "FILTER" screen
to adjust the filter passband width.
When the "FILTER" screen is displayed, push for 1
second to return to the previous screen.
1-19
PANEL DESCRIPTION
selects the general coverage band.
, enter a numeric fre-
again.
.
1
-