Setting Compression - JVC KV-DV7J Instructions Manual

3
Press ENTER.
Digital Out selecting screen appears.
ENTER
4
Press Cursor ∞ (or 5) to select an
appropriate output, then press
ENTER.
H/P VOL
ENTER
H/P VOL
• STREAM: Select this when connecting an
amplifier or a decoder
compatible with Dolby Digital
and with DTS Digital Surround.
• LPCM: Select this when connecting an
amplifier or a decoder
incompatible with Dolby Digital
and with MPEG Audio.
• OFF: Select this when you use the
AUDIO L/R (analog) jacks on
the rear.
Only with this setting, you
can enjoy original high-
quality sound of disc whose
sampling frequency is 96 kHz
through the AUDIO L/R jacks.
(No signal will be output from
the DIGITAL OUT terminal.)
For more detailed information about the output
signals, see page 35.
To erase the Setup Menu screen, press MENU/
SETUP while holding SHIFT (S).
DIGITAL OUT
STREAM STREAM
LPCM LPCM
OFF OFF
RETURN SELECT ENTER OK

Setting compression

You can compress the dynamic range (difference
between the maximum and minimum sound
levels) while playing a source encoded with Dolby
Digital. This is useful when listening at a low
volume level.
To go back to the previous screen during the
procedure, press RETURN
1
While holding SHIFT (S), press
MENU/SETUP.
Setup Menu appears on the screen.
SHIFT
and
MENU
S
SETUP
2
Press Cursor ∞ (or 5) to select
"AUDIO," then press ENTER.
Audio menu appears.
H/P VOL
ENTER
H/P VOL
3
Press Cursor ∞ (or 5) to select
"COMPRESSION," then press
ENTER.
Compression Rate selecting screen
appears.
H/P VOL
ENTER
H/P VOL
DVD
.
SETUP MENU
LANGUAGES
AUDIO
DISPLAY
RETURN SELECT ENTER OK
AUDIO
DIGITAL OUT: DIGITAL OUT: STREAM STREAM
COMPRESSION: STANDARD COMPRESSION: STANDARD
¡
AUDIO DURING : AUDIO DURING : ON ON
RETURN SELECT OK
ENTER
COMPRESSION
FULL FULL
STNDARD STNDARD
NIGHT NIGHT
RETURN SELECT OK
ENTER
TO BE CONTINUED
23