Table of Contents
Advertisement
The self-diagnosis function consists of error codes for customers, which are displayed automatically when errors occur, and error codes,
which show the error history in the test mode during servicing. For details on how to view error codes for the customer, refer to the
following box in the instruction manual. For details on how to check error codes during servicing, refer to the following "Procedure for
using the Self-Diagnosis Function (Error History Display Mode)".
Self-diagnosis Display
This system has a Self-diagnosis display function
to let you know if there is a system malfunction.
The display shows a code made up of three letters
and a message alternately to show you the
problem. To solve the problem refer to the
following list. If any problem persists, consult
your nearest Sony dealer.
C11/Protected
The MD is protected against erasure.
cRemove the MD and slide the tab to close the
slot (see page 24).
C12/Cannot Copy
You tried to record a CD or MD with a format
that the system does not support, such as a CD-
ROM.
cRemove the disc and turn off the system once,
then turn it on again.
PROCEDURE FOR USING THE SELF-DIAGNOSIS FUNCTION (ERROR HISTORY DISPLAY MODE)
Note 1: About "R"
As this unit has only a few buttons, some operations require the use of remote commander (RM-SF3MD/provided with unit: 1-476-068-11)
buttons. These operations are indicated as "R" in this manual.
Example:
MENU/NO "R"
Note 2: Incorrect operations may be performed if the MD test mode is not entered properly.
In this case, press the I/
Note 3: Perform the self-diagnosis function in the "error history display mode" in the MD test mode. The following describes the least required
procedure. Be careful not to enter other modes by mistake. If you set other modes accidentally, press the
mode.
Procedure:
1. Press the
button to turn the power on.
I/1
[FUNCTION]
2. Press the
button to set the MD function.
3. Press three buttons of
s
4. Press the
l m
or
M L
5. Press the
or
l m
M L
6. Press the
ENTER/YES "R"
7. Select the contents to be displayed or executed using the
[CD-MD SYNC]
8. Press the
[CD-MD SYNC]
9. Press the
10. Press the
button displays "ERR DP MODE" and release the error history mode.
MENU/NO "R"
11. To release the MD test mode, press the
2
SELF-DIAGNOSIS FUNCTION
C13/REC Error
Recording could not be performed properly.
cMove the system to a stable place, and start
recording over from the beginning.
The MD is dirty or scratched, or the MD does
not meet the standards.
cReplace the MD and start recording over from
the beginning.
C13/Read Error
The MD deck cannot read the disc information
properly.
cRemove the MD once, then insert it again.
C14/Toc Error
The MD deck cannot read the disc information
properly.
cReplace the MD.
cErase all the recorded contents of the MD
using the All Erase function on page 38.
C41/Cannot Copy
The sound source is a copy of a commercially
available music software, or you tried to record
a CD-R (Recordable CD).
cThe Serial Copy Management System
prevents making a digital copy (see page 53).
You cannot record a CD-R.
[MENU/NO]
...Press the
button of the remote commander.
button to turn the power off, and retry to enter the MD test mode.
1
(MD) ,
zREC
and
simultaneously to enter the MD test mode and display "[Check]".
I/1
button to display "[Service]", and press the
button to display "ERR DP MODE".
button to enter the error history mode and display "total rec".
button will display or execute the contents selected.
button another time returns to step 7.
[REPEAT]
button to display "Initialize" and release the MD test mode.
ENTER/YES "R"
l m
or
M L
button.
button to exit the
MENU/NO "R"
button.
Advertisement
Table of Contents
