Table of Contents
Advertisement
Find Quality Products Online at:
4 Operation
1
Press
to configure the measurement.
You can make the following settings:
- Measuring interval: in s
- Measurement duration: in hrs and min
2
Use
to select the required parameter and make settings.
3
Press
or
to exit the menu.
The maximum measurement period depends on the condition of the
battery, how much free memory there is and the probe used. This is
displayed during configuration.
In the long-term mode application [Logger Mode], the measurement
(from firmware version 1.0.4) is always saved automatically at the end
of the configured measurement period.
testo recommends using an external power supply for each micro USB
in the case of particularly long measurements. It is then possible to
record significantly longer measurement series.
0554 1105 - USB mains unit including cable
48
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
