Basic Dvd Operations; Turn On The Power; Select The Source; Load A Dvd - JVC TH-A30 Instructions Manual

Basic DVD Operations

This manual mainly explains operations using the buttons on
the remote control. You can also use the buttons on the center
unit if they have the similar names (or marks) as those on the
remote control.
If operations using the center unit are different from those
using the remote control, they are then explained.
1
STANDBY/ON
AUDIO
STANDBY/ON
AUDIO
TV
TV VCR
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
2
DVD
DVD FM/AM
8
7
TUNER PRESET
DOWN
REW
VCR CHANNEL
B.SEARCH
5
VOLUME –
TOP MENU MENU
1
4
7
SLOW
ANGLE ZOOM
REPEAT A-B REPEAT
CLEAR SEARCH
For in-depth information about DVD operations, see
pages 27 to 36.
1

Turn On the Power

Before turning on the system, turn on your TV and select the correct
video input. (See the manual supplied with your TV.)
• When you use a JVC's TV, you can turn on your TV by pressing
TV on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC's, see "Operating
Other Manufacturers' TV" on page 55.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see "Setting the Initial
Languages" on pages 49 and 50.
Press STANDBY/ON AUDIO (or
STANDBY/ON on the front panel).
The STANDBY lamp goes off and the illumination
lamp on the center unit lights up. The source
indication selected previously appears on the display.
6
PROGRESSIVE
TV/VIDEO PROGRESSIVE
TV CHANNEL
TV/VIDEO
TV VOLUME
VCR
AUX
CONTROL
4
3/8
UP
FF
TUNING
F.SEARCH
ENTER
5
VOLUME +
VOLUME
MUTING
RETURN MUTING
SOUND
2 3
SETTING
5 6
PRO LOGIC
8 9
SETUP
TEST
7
0
DSP MODE
D.R.C DSP MODE
PROGRAM
REMAIN
SLEEP
STANDBY/ON
AUDIO
2

Select the Source

Press DVD.
The source changes to DVD.
3
Load a
DVD
On the front panel ONLY:
Press 0 to open the disc tray, then place a DVD correctly
with its label side up.
CORRECT
4

Start Playback

3/8
Press .
The disc tray closes. "LOADING" appears for
a while.
• You can also start playback by closing the
disc tray using 0 on the front panel.
5
A
djust the Volume
To increase the volume, press and hold VOLUME +.
To decrease the volume, press and hold VOLUME –.
VOLUME
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
• By pressing VOLUME + or – repeatedly, you can adjust the volume
level step by step.
• The volume level can be adjusted within 51 steps—"MIN (minimum),"
01 to 49, and "MAX (maximum)."
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
To restore the sound, press
MUTING again.
• Pressing VOLUME + or – also restores the sound.
DVD
INCORRECT
TUNER PRESET
TOP MENU MENU RETURN MUTING
12