JVC TH-A30 Instructions Manual page 102

DVD Playback
STANDBY/ON
AUDIO
TV VCR
STEP
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
DVD FM/AM
TUNER PRESET
DOWN
REW
VCR CHANNEL
B.SEARCH
3/2/5/∞
ENTER
TOP MENU MENU
1
4
7
SLOW
SLOW
ANGLE ZOOM
REPEAT A-B REPEAT
CLEAR
CLEAR SEARCH
To exit from program play
From the remote control ONLY:
Press PROGRAM.
The PROGRAM MENU screen goes off, and the
opening screen appears. (The program you made is still
kept in memory.)
• If you press 3/8 while this screen is shown, the unit starts normal
playback.
DVD/Video CD/CD PLAYER
35
TV/VIDEO PROGRESSIVE
TV CHANNEL
TV VOLUME
VCR
AUX
CONTROL
3/8
UP
FF
TUNING
F.SEARCH
ENTER
VOLUME
RETURN MUTING
SOUND
2 3
SETTING
5 6
PRO LOGIC
8 9
SETUP TEST
0
ZOOM
D.R.C DSP MODE
PROGRAM
PROGRAM
REMAIN SLEEP
PROGRAM
To erase the stored program
Press 0 to eject the disc.
• If you turn off the system or change the source, the
program is also erased.
To check the program contents
You can check the program contents by pressing PROGRAM.
The PROGRAM MENU screen appears on the TV screen.
• If you press the button during playback, the program play will
stop.
To modify the program
You can modify the program while the PROGRAM MENU screen is
shown on the TV screen.
• To erase a step: Press ∞ (or 5) to select (highlight) an unwanted
program step, then press CLEAR.
• To modify a step: Press ∞ (or 5) to select (highlight) a program
step you want to modify, then perform steps 3 to 5 on page 34.
(Before entering a new number, press CLEAR repeatedly until
"– –" appears on the number entry position.)
• To add a step: Press ∞ (or 5) to select (highlight) an empty
program step, then perform steps 3 to 5 on page 34.
• To move to program step 10 from program step 11, press 5
when program step 11 is selected (highlighted) so that
"PREVIOUS »" is selected (highlighted). Then, press ENTER.
• To move to program step 11 from program step 10, press ∞
when program step 10 is selected (highlighted) so that "NEXT
« " is selected (highlighted). Then, press ENTER.