Speaker Settings; Setting The Delay Time - JVC TH-A30 Instructions Manual

Speaker Settings

STANDBY/ON
AUDIO
TV VCR
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
DVD FM/AM
TUNER PRESET
DOWN
REW
VCR CHANNEL
TUNING
B.SEARCH
2 3
ENTER
VOLUME
TOP MENU MENU
1 2
4 5
7 8
SLOW
0
ANGLE ZOOM
REPEAT A-B REPEAT
CLEAR SEARCH
TV/VIDEO PROGRESSIVE
TV CHANNEL
TV VOLUME
VCR
AUX
CONTROL
UP
FF
F.SEARCH
RETURN MUTING
SOUND
3
SETTING
SETTING
6
PRO LOGIC
PRO LOGIC
9
SETUP TEST
D.R.C DSP MODE
PROGRAM
REMAIN SLEEP

Setting the Delay Time

Adjust the delay time of the sounds from the center speaker and the
rear speakers, comparing to that of the sounds from the front
speakers. If the distance to the center speaker* and/or the rear
speakers** from your listening point is almost the same as from the
front speakers, select "00 MS (msec)."
* You can adjust the delay time only when the DOLBY DIGITAL
or DTS indicator is lit on the display.
** You can adjust the delay time only when the DOLBY DIGITAL,
DTS, or PRO LOGIC indicator is lit on the display.
For Dolby Digital or DTS Digital Surround:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Select and play a DVD encoded with Dolby
Digital or DTS Digital Surround.
2
Press SETTING repeatedly until one of
delay time indications (with the current
setting*) appears on the display.
• Each time you press the button, the indication in the main
display changes as follows:
C–DLY
Normal indication
(canceled)
C–DLY (Center delay) : To register delay time for center
speaker—from 0 msec to 5 msec
R–DLY (Rear delay) : To register delay time for rear
speakers—from 0 msec to 15 msec
* The initial setting for the center speaker is "00 MS."
The initial setting for the rear speakers is "00 MS."
If you have already changed the setting, a different value will
be shown.
3
Press 3 or 2 to adjust delay
time.
• 3 : Increases delay time.
• 2 : Decreases delay time.
• 1 msec increase (or decrease) in delay
time corresponds to 30 cm increase (or
decrease) in distance.
4
Repeat steps 2 and 3 to adjust the
other delay time.
SETTING
R–DLY
ENTER
18