Basic Disc Operations - JVC TH-A30 Instructions Manual

Basic Disc Operations

STANDBY/ON
AUDIO
TV
DISPLAY STEP
AUDIO/
SUBTITLE
FM MODE
DVD FM/AM
4
TUNER PRESET
DOWN
REW
7
B.SEARCH
SVCD can be operated by using the VCD operation
procedure.
To start playback
Press 3/8.
The source is automatically changed to the
DVD player.
"WAIT" appears on the display for a while,
then the detected disc type appears—DVD, VCD, CD, or MP3. (If
your TV is turned on, the mark corresponding to the detected disc
type appears on the TV screen.)
• When a disc is not loaded, "NO DISC" appears on the display.
Disc play starts from the first chapter or track of the selected disc.
• If a menu appears while playing a DVD or VCD with PBC
function, see "Disc Menu-Driven Playback" (for DVD) on page 31
or "Disc Menu-Driven Playback (Only for VCD)" on page 38.
Note:
If "WRONG PARENTAL CODE" appears on the TV screen, Parental
Lock is in use. You cannot play back a DVD containing violent scenes
or those not suitable for your family members.
To play back such a disc, cancel the Parental Lock. (See page 52.)
Playback information on the display
DVD
Title No. Chapter No.
VCD/CD
MP3
VCR TV/VIDEO PROGRESSIVE
TV CHANNEL
TV VOLUME
VCR
AUX
CONTROL
¢
UP
FF
3/8
VCR CHANNEL
TUNING
F.SEARCH
ENTER
TUNER PRESET
Elapsed playing
time
Track No. Elapsed playing
time
Track No. Elapsed playing
time
To stop playback for a moment
Press 3/8.
While pausing, minute and second digit
of elapsed playing time flashes on the display.
• To resume play, press 3/8 again.
To go to another chapter or track
Press ¢ or 4 repeatedly during playback.
• ¢ : Skips to the beginning of the next or succeeding chapter or
track.
• 4 : While a DVD, a VCD with PBC or MP3 is played back
Goes back to the beginning of the previous chapter or track.
While a CD or a VCD without PBC is played back
Goes back to the beginning of the current or previous track.
To go to another title (only possible on a DVD)
or track (only possible on a CD and VCD)
directly using the number buttons
Pressing the number buttons before or during play allows you to
start playing the title/track number you want. (If your TV is turned
on, the on-screen bar is pulled down automatically on the TV
screen.)
• To select number 1 to 9, press the corresponding number button
(then press ENTER or wait for 5 seconds).
• To select number 15, press 1, 5.
• To select number 23, press 2, 3.
To stop during playback
Press 7.
(If your TV is turned on, " STOP" appears
on the TV screen.)
• When an MP3 disc is played back, playback
stops completely.
• This system can memorize the end point even when you press 7.
When you start playback again by pressing 3/8, playback begins
from where it has been stopped—Resume play.
• To stop completely, press 7 twice. ("7 STOP" appears on the TV
screen.) The disc type appears on the display.
The DVD player goes on working for 3 minutes after playback
stops.
To remove the disc
Press 0 on the front panel.
The disc tray comes out.
To close the disc tray, press 0 again.
• If you do not press the button, the disc tray closes
automatically 3 minutes after.
TUNER PRESET
TUNER PRESET
28