JVC TH-A30 Instructions Manual page 93

3
To adjust the output balance for the front
speakers and the rear speakers
1) Press SOUND repeatedly until one of
the following adjustment indications
appears on the display.
• Each time you press the button, the adjustment
indication on the display changes as follows:
00 F 00
Normal indication
(canceled)
00 F (Front) 00 : To adjust the output balance for the front
speakers.
00 R (Rear) 00 : To adjust the output balance for the rear
speakers.
• "00 F 00" and "00 R 00" are the initial setting (the output
balances are at the center position). If you have already
changed the setting, another value will appear.
2) Press 3 or 2 to adjust the
output balance.
3 : Decreases the left speaker
output, or restores the right
speaker output.
2 : Decreases the right speaker
output, or restores the left
speaker output.
• Each output balance changes from
OFF (silence), –06 (most reduction) to 00 (no reduction).
3) Repeat 1) and 2) for setting the other speaker.
SOUND
00 R 00 CEN
SW REAR
ENTER
4
To adjust the output level for the rear speakers
1) Press SOUND repeatedly until "REAR"
appears on the display.
• Each time you press the button, the adjustment
indication on the display changes as follows:
00 F 00
Normal indication
(canceled)
REAR : To adjust the output level for rear speakers
(from –6 dB to +6 dB).
• "REAR 0dB" is the initial setting. If you have already
changed the setting, another value will appear.
2) Press 3 or 2 to adjust the
output level.
3 : Increases the output level.
2 : Decreases the output level.
SOUND
00 R 00 CEN
SW
REAR
ENTER
26