Programming The Playing Order Of The Tracks-Program Play - JVC TH-A30 Instructions Manual

Programming the Playing Order of the
Tracks—Program Play
You can arrange the track playback order before you start playing.
You can program up to 20 steps.
• Before making a program, make sure that the TV is turned on
and the correct input is selected on the TV.
From the remote control ONLY:
1
Load a disc.
• If the current playing source is not the DVD player, press
3/8, then 7 before going to the next step.
2
Press PROGRAM.
The PROGRAM MENU screen appears on the TV
screen.
• "PROGRAM" appears on the display.
PROGRAM MENU
TRACK TRACK
1 – – 6
2 – – 7
3 – – 8
4 – – 9
5 – – 10
PREVIOUS NEXT
PLAY: 3
FINISH: PROGRAM
3
Press ENTER.
PROGRAM MENU
TRACK TRACK
1 – – 6
2 – – 7
3 – – 8
4 – – 9
5 – – 10
CHOOSE : 1–17
PREVIOUS NEXT
PLAY: 3
FINISH: PROGRAM
Track numbers you can select in the
next step
4
Press 3 or 2 to select a track
number, then ENTER.
• 3 : Increases the number.
• 2 : Decreases the number.
• You can also select a track number
using the number buttons.
PROGRAM MENU
TRACK TRACK
1 7 6
2 – – 7
3 – – 8
4 – – 9
5 – – 10
PREVIOUS NEXT
PLAY: 3
FINISH: PROGRAM
PROGRAM
SELECT: ENTER
– –
– –
– –
– –
– –
SELECT: ENTER
ENTER
– –
– –
– –
– –
– –
ENTER
SELECT: ENTER
– –
– –
– –
– –
– –
5
Repeat steps 3 and 4 to program other tracks
you want.
• After 10 steps are programed, "NEXT «" is selected
(highlighted). If you want to program more steps, press
ENTER.
6
Press 3/8.
The tracks are played in the order you have
programed and the PROGRAM indicator
lights up.
After all the tracks you programed are played back, the
PROGRAM MENU screen appears on the TV screen again.
To stop during play
Press 7 or PROGRAM on the remote
control.
The PROGRAM MENU screen appears on
the TV screen.
• If you press 3/8 while this screen is shown, the system starts
program play.
PROGRAM MENU SELECT: ENTER
T R A C K T R A C K
1 7 6 1
2 6 7 – –
3 9 8 – –
4 1 3 9 – –
5 1 1 10 – –
PREVIOUS NEXT
PLAY: 3
FINISH: PROGRAM
To exit from program play
From the remote control ONLY:
Press PROGRAM.
The PROGRAM MENU screen goes off, and the
opening screen appears. (The program you made is
still kept in memory.)
• If you press 3/8 while this screen is shown, the unit starts normal
playback.
DVD/Video CD/CD PLAYER
To erase the stored program
Press 0 to eject the disc.
• If you turn off the system or change the source, the
program is also erased.
To check the program contents
You can check the program contents by pressing
PROGRAM. The PROGRAM MENU screen appears on
the TV screen.
• If you press the button during playback, the program play will
stop.
TO BE CONTINUED ON THE NEXT PAGE
TUNER PRESET
TUNER PRESET
PROGRAM
PROGRAM
40