Basic Dvd Operations; Turn On The Power; Load A Dvd; Start Playback - JVC TH-A5 Instructions Manual

Basic DVD Operations

This manual mainly explains operations using the buttons on
the remote control. You can also use the buttons on the center
unit if they have the similar names (or marks) as those on the
remote control.
If operations using the center unit are different from those
using the remote control, they are then explained.
1
STANDBY/ON
AUDIO
STANDBY/ON
AUDIO
TV
TV VCR
TOP MENU MENU
AUDIO/
SUBTITLE
FM MODE
DISPLAY RETURN
6
7
TUNER PRESET
DOWN
REW
VCR CHANNEL
B.SEARCH
4
VOLUME –
DVD FM/AM
1
4
7
SLOW
ANGLE NTSC/PAL
ZOOM
REPEAT A-B REPEAT
CLEAR SEARCH
For in-depth information about DVD operations, see
pages 25 to 33.
1

Turn On the Power

Before turning on the system, turn on your TV and select the correct
video input. (See the manual supplied with your TV.)
• When you use a JVC's TV, you can turn on your TV by pressing
TV on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC's, see "Operating
Other Manufacturers' TV" on page 51.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see "Setting the Initial
Languages" on pages 46 and 47.
Press STANDBY/ON AUDIO (or
STANDBY/ON on the front panel).
The STANDBY lamp goes off and the illumination
lamp on the center unit lights up. The source
indication selected previously appears on the display.
10
VCR
CONTROL
OFF ON
TV CHANNEL
TV VOLUME
TV/VIDEO
STEP TV/VIDEO
3
3/8
UP
FF
TUNING
F.SEARCH
ENTER
4
VOLUME +
VOLUME
MUTING
AUX MUTING
SOUND
2 3
SETTING
5 6
PRO LOGIC
8 9
SETUP TEST
5
0
DSP MODE
D.R.C DSP MODE
PROGRAM EFFECT
REMAIN SLEEP
STANDBY/ON
AUDIO
2
Load a
DVD
On the front panel ONLY:
Press 0 to open the disc tray, then place a DVD correctly
with its label side up.
CORRECT
3

Start Playback

3/8
Press .
The disc tray closes. "LOADING" appears for a
while.
• You can also start playback by closing the
disc tray using 0 on the front panel.
4
A
djust the Volume
To increase the volume, press and hold VOLUME +.
To decrease the volume, press and hold VOLUME –.
VOLUME
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
• By pressing VOLUME + or – repeatedly, you can adjust the volume
level step by step.
• The volume level can be adjusted within 71 steps—"MIN
(minimum)," 01 to 69, and "MAX (maximum)."
To turn off the sounds temporarily
From the remote control ONLY:
Press MUTING.
To restore the sound, press
MUTING again.
• Pressing VOLUME + or – also restores the sound.
INCORRECT
TUNER PRESET
DVD FM/AM AUX MUTING