Other Basic Operations; Enjoying Sounds From The External Component; Selecting An Appropriate Progressive Mode; Turning Off The Power With The Timer - JVC TH-A30 Instructions Manual

Other Basic Operations

TV VCR TV/VIDEO
TV CHANNEL
STEP
DISPLAY
AUDIO/
SUBTITLE TV VOLUME
FM MODE
DVD FM/AM AUX
TUNER PRESET
DOWN
REW
VCR CHANNEL
TUNING
B.SEARCH
ENTER
VOLUME
TOP MENU MENU
RETURN
1 2 3
4 5 6
7 8 9
SLOW SETUP
0
ANGLE ZOOM D.R.C
REPEAT A-B REPEAT PROGRAM
CLEAR SEARCH REMAIN
Enjoying Sounds from the External
Component
You can enjoy sounds from the external component connected to the
AUX IN jacks on the rear panel of the center unit.
1
Select AUX as the source.
From the remote control:
Press AUX.
Source changes to the external component connected
to the AUX IN jacks.
On the front panel:
Press SOURCE repeatedly until "AUX IN"
appears on the display.
• Each time you press the button, the source
changes as follows:
DVD player*
AM
* "WAIT" appears on the display.
2
Start playback on the external component.
• For in-depth information about the external equipment, see the
manual supplied for it.
When you listen to analog sounds encoded with Dolby
Surround, you can enjoy Dolby Surround.
3
Press PRO LOGIC to activate Dolby
Surround.
• Each time you press the button, Dolby Surround
mode changes as follows:
PRO LOGIC
STEREO
(canceled)
17
PROGRESSIVE
PROGRESSIVE
AUX
VCR
CONTROL
UP
FF
F.SEARCH
MUTING
SOUND
SETTING
PRO LOGIC
PRO LOGIC
TEST
DSP MODE
SLEEP
SLEEP
AUX
SOURCE
AUX IN
FM
PRO LOGIC
3 STEREO
• When Dolby Surround activates, the PRO LOGIC indicator
lights up on the display.
– For in-depth information about Pro Logic modes, see "Creating
Realistic Sound Fields" on pages 20 and 24.

Selecting an Appropriate Progressive Mode

You can select an appropriate progressive mode according to the
picture type (film or video source).
From the remote control ONLY:
Press PROGRESSIVE repeatedly during playback
until the progressive mode you want appears.
• Each time you press the button, the progressive mode
changes as follows:
VIDEO MODE
AUTO MODE
VIDEO MODE : Suitable for playing back a video source disc.
FILM MODE : Suitable for playing back a film or progressive
source disc.
AUTO MODE : Normally select this. Used to play a disc
containing both video and film source
materials.
This system recognizes the picture type (film or
video source) of the current chapter.
• If the playback picture is unclear or noisy, or the oblique lines of
the picture are rough, try to change to other modes.
Notes:
• This mode is available only when progressive scanning mode is
selected (see page 11).
• For VCD/SVCD playback, VIDEO MODE is selected automatically
and cannot be changed.

Turning Off the Power with the Timer

You can fall asleep while listening to music—Sleep Timer.
From the remote control ONLY:
Press SLEEP.
• Each time you press the button, the shut-off time
changes as follows:
10 20
150
OFF
(Canceled)
When the shut-off time comes, the system turns off automatically.
To check or change the time remaining until the
shut-off time
Press SLEEP once.
The remaining time (in minutes) appears on the display.
• By pressing SLEEP, you can change the shut-off time.
To cancel the Sleep Timer
Press SLEEP repeatedly until "OFF" appears on the
display.
• Turning off the power also cancels the Sleep Timer.
PROGRESSIVE
FILM MODE
SLEEP
30 60
120 90
SLEEP
SLEEP