Add The Ip Address Of The Machine (Use The Windows7 Operating System As An Example) - ZLG CANSwitch-AF2S2 User Manual

CANSwitch-AF2S2
High-Performance Dual-CAN to Fiber Switch User Manual
network segment as the user's PC according to the process shown in Figure 4.4. If you
are on the same network segment, you do not need to read the following content about
the PC network settings. If different, the following PC network settings are very important
for you.
Figure 4.4 Checking whether the IP address of the CANSwitch-AF2S2
device and the PC are on the same network segment
The following describes how to set your PC and CANSwitch-AF2S2 device to the
same network segment.
If you are using Windows 2000/XP/7/8/10, there are two methods. One is to add the
local IP address, and the other is to change the local IP address.
4.2.4 Adding the IP Address of the Machine (Use Windows7 as an example)
It is assumed that the IP address of the user's PC is 192.168.7.91, and the IP address
of the CANSwitch-AF2S2 device is the default IP address 192.168.0.178.
In the operating system, right-click the Start button  Control Panel  Network and
Sharing Center  to modify the advanced sharing settings. The Network Connections
window is displayed. Select the local area connection icon (Note: The connection is a
CANSwitch-AF2S2 device network connection. If the user has multiple network cards,
there may be multiple local area connections), right-click the local area connection . The
window shown in Figure 4.5 appears.
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
22
User Manual