CANSwitch-AF2S2
High-Performance Dual-CAN to Fiber Switch User Manual
Because the preset frame ID filter only filters the frame ID sent from the CAN port to
the optical fiber, and the frame ID sent from the optical fiber to the CAN port is not filtered,
both frames of data USBCAN can be received properly as shown in Figure 4.27.
4.4 TCP Client Mode
4.4.1 System Block Diagram
In TCP Client mode, the CANSwitch-AF2S2 will actively connect to the preset TCP
Figure 4.26 PC sending data 1
Figure 4.27 USBCAN receiving data 1
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
34
User Manual