Product Specification; Fiber Interface; Can Interface - ZLG CANSwitch-AF2S2 User Manual

CANSwitch-AF2S2
High-Performance Dual-CAN to Fiber Switch User Manual

Provide Windows configuration software function library for free, including
easy-to-use API function library, which helps you write configuration software;

Support local system firmware upgrade.
In Converter mode:

Static or dynamic IP acquisition;

Heartbeat and timeout disconnection;

The working port is fixed, and the destination IP address and port can be set;

After the network is disconnected, the connection resources are automatically
restored, and the TCP connection is established reliably;

TCP supports a maximum of 200 connections, which can satisfy six groups of
users and manage one CAN port;

In UDP mode, each CAN port supports six groups of target IP segments. Multiple
users can manage a CAN device at the same time;

Supported protocols include ETHERNET, ARP, IP, ICMP, UDP, DHCP, DNS, and
TCP;

Compatible with SOCKET working methods (TCP Server, TCP Client, UDP, etc.).
The writing of the host computer communication software follows the standard
SOCKET rules;

Each CAN port can be set to a different baud rate;

Two-way transparent transmission of CAN data and optical fiber data (for the
format, see Appendix A);

Flexible CAN port data framing settings meet various subcontracting needs;

Support the acceptance and filtering of CAN ports. You can select the ID range to
be received, so as to filter unwanted CAN frames;

Each CAN port can be configured into different working modes, which can be
flexibly used in various fields;

Each CAN port opens a diagnostic port, and the host computer can obtain the
error status of the corresponding CAN port by connecting this port;

You can use the Windows platform configuration software to configure operating
parameters. The parameters can be imported and exported;

Provide Windows platform configuration software function library for free,
including easy-to-use API function library, which helps users write their own
configuration software;

Support local system firmware upgrade.
1.2 Product Specifications
1.2.1 Fiber Interfaces

Number of fiber ports: 2;

Interface type: SC;

Fiber type: single mode;

Operating wavelength: 1,310 nm;

Operating rate: 100 Mbps.
1.2.2 CAN Interfaces
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
3
User Manual