Obtaining Device Configurations - ZLG CANSwitch-AF2S2 User Manual

CANSwitch-AF2S2
High-Performance Dual-CAN to Fiber Switch User Manual
The configuration software is installed.

5.2 Obtaining Device Configurations

Before obtaining the configuration information, check whether the RS232
configuration serial port has been connected to the computer or the CANSwitch-AF2S2
device and the PC network card have been connected with a network cable (a
fiber-to-Ethernet switch needs to be added)..
Run the ZNetCom software (if the system is later than Windows 7, right-click it and
run as administrator). The interface shown in Figure 5.6 appears.
Figure 5.5 Installation completed
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
55
User Manual