Table of Contents
Advertisement
CANSwitch-AF2S2
High-Performance Dual-CAN to Fiber Switch User Manual
Figure 5.16 Opening device configuration information
5.6 Upgrading the Firmware
CANSwitch-AF2S2 series devices support local firmware upgrade. When you
upgrade the CANSwitch-AF2S2 device by using the ZNetCom software, the PC and the
CANSwitch-AF2S2 device must be on the same network segment (refer to 4.2 PC and
device network segment detection ). The firmware upgrade procedure is as follows:
1.
In the device list column of ZNetCom software, select the device to be upgraded
in the list item, and right-click the mouse. The menu items appear, as shown in
Figure 5.17.
2.
Click [Upgrade Firmware]. On the firmware upgrade interface shown in Figure
5.18, enter the password (the default password is 88888), select the upgrade file,
and click "Open".
Figure 5.17 Firmware upgrade menu
©2021 Guangzhou ZLG Electronics Technology Co.,Ltd.
74
User Manual
Advertisement
Table of Contents
