Chapter 2. Components And Functions; Hardware Components And Functions - Vatech PAX Duo3D Installation Manual

Chapter 2.
2.1.

Hardware Components and Functions

LED Lamp: Indicating the current X-Ray emission activity of unit. While it stays green when the
unit is idle, led lamp turns orange when the unit is in operation.
Emergency switch: stop the movement of the unit when it abnormally operates.
Sensor Module: Digital X-ray image sensor module for Panoramic and Dental CT imaging units.
With its Auto-Switching sensor technology, there is no need to change sensors when imaging
mode changed.
Chinrest: provide the patient comfort and rest while imaging, thus producing better image.
LCD panel: the supporting device to monitor and control the Unit activity.
Handle frame: is used for the patient to hold firmly while imaging to stabilize his or her position.
Column: is used to adjust the unit height according to the height of patient.
PaX-Duo3D
10
Components and Functions
LED Lamp
Emergency Switch
Sensor Module
Chinrest
LCD Panel
Handle Frame
Column