GEM B54 Operating Instructions Manual page 100

21 Declaration of Incorporation according to 2006/42/EC (Machinery Directive)
21 Declaration of Incorporation according to 2006/42/EC (Machinery Directive)
according to the EC Machinery Directive 2006/42/EC, Annex II, 1.B for partly
We,
declare that the following product
Make
Serial number
Project number
Commercial name:
meets the following essential requirements of the Machinery Directive 2006/42/EC:
1.1.3, 1.1.5, 1.1.7, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3., 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.5.3, 1.5.5, 1.5.6, 1.5.7, 1.5.8,
1.5.9, 1.5.13, 1.5.14, 1.5.16, 1.6.1, 1.6.3, 1.6.5, 1.7.1.2
We also declare that the specific technical documentation has been compiled in accordance with part B of Annex VII.
Reference of the harmonised standards (or parts thereof) applied in accordance with Article 7(2):
EN ISO 12100:2010-11
EN 1983:2013
Citation of other technical standards and specifications used:
EN 558:2017-05
ISO 5211:2017-03
The manufacturer or his authorised representative undertake to transmit, in response to a reasoned request by the national au-
thorities, relevant information on the partly completed machinery. This transmission takes place:
Electronically
Authorised documentation officer
This does not affect the industrial property rights!
Important note! The partly completed machinery may be put into service only if it was determined, where appropriate, that the
machinery into which the partly completed machinery is to be installed meets the provisions of this Directive.
2021-10-06
Joachim Brien
Head of Technical Department
GEMÜ B54
Declaration of Incorporation
completed machinery
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen-Criesbach, Germany
GEMÜ B54
from 01.01.2019
KGH-Metall-elektrisch 2020
B54
Safety of machinery – General principles for design – Risk assessment and risk re-
duction (ISO 12100:2010)
Industrial valves - Steel ball valves
Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use
in flanged pipe systems
Industrial valves - Part-turn actuator attachments
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen, Germany
100 / 104 www.gemu-group.com