Leviton EZ-MAX Plus 8 Quick Start Manual page 31

EZ-MAX Plus QuickStart.book Page 31 Thursday, January 22, 2009 1:55 PM
Configuring Inputs
Step 7: Assign the switch to a particular relay. Use the numeric
keypad to enter a relay number. Press
to the next field and toggle I GNORE to
to assign the relay. Cycle through all relays until you have
set all of them to YES or I GNORE. Press
Step 8: Continue to use the
field and the behavior field, and cycle through all relays
until you have set all of them to YES or I GNORE. Press
Select/ Save
relays.
Page 31
ASSIGN RELAYS
RELAY# 3: YES
when you have finished assigning all
EZ-MAX Plus Quick Start Guide
to navigate
YES
if you want
Select/ Save.
to move between the relay