Edi T Event - Leviton EZ-MAX Plus 8 Quick Start Manual

EZ-MAX Plus QuickStart.book Page 21 Thursday, January 22, 2009 1:55 PM
The Scheduler

EDI T EVENT

Step 1: Press the
Step 2: Press
press
Step 3: Press
press
Step 4: Use the numeric keypad to enter the event number you
want to modify. Once you actually enter the event
number the event time will display. Press
SELECT/ SAVE
Step 5: Use the alphanumeric keys to input the relay number.
Press
or
any relays you want to be affected by this event to YES.
Press
relays.
Step 6: Continue to use the
field and the behavior field, and cycle through all relays
until you have set all of them to YES or I GNORE. Press
Page 21
MENU
button
or until the display reads as below, then
SELECT/ SAVE.
MAIN MENU SELECT
SCHEDULER
until the display reads EDI T EVENT, then
SELECT/ SAVE.
SCHEDULER
EDIT EVENT
.
SELECT EVENT #
E022: 7:00AM
to navigate to the I GNORE/ YES field. Press
to toggle between YES and I GNORE and set
SELECT/ SAVE
when you have finished setting all
ASSIGN RELAYS
RELAY #01 YES
EZ-MAX Plus Quick Start Guide
to move between the relay