Leviton EZ-MAX Plus 8 Quick Start Manual page 27

EZ-MAX Plus QuickStart.book Page 27 Thursday, January 22, 2009 1:55 PM
Configuring Inputs
to navigate to the next field and toggle I GNORE to
YES
if you want to assign the relay.
Step 7: Continue to use the
field and the behavior field, and cycle through all relays
until you have set all of them to YES or I GNORE. Press
Select/ Save
relays.
NOTE:
Occupancy sensor Delay times and Retrigger times
must be set on the occupancy sensor itself.
LV I NPUT—Photocell
Step 1: Press the
Step 2: Press
press
Step 3: Press
Select/ Save
Step 4: Use the numeric keypad to enter the input number for
the photocell. Press
Page 27
ASSIGN RELAYS
RELAY# 3:
when you have finished assigning all
MENU button.
or until the display reads as below, then
SELECT/ SAVE.
MAIN MENU SELECT
CONFIG INPUTS
or to navigate to LV I NPUT, and press
.
INPUT TYPE
LV INPUT
to navigate to the next field,
EZ-MAX Plus Quick Start Guide
YES
to move between the RELAY