Leviton EZ-MAX Plus 8 Quick Start Manual page 28

EZ-MAX Plus QuickStart.book Page 28 Thursday, January 22, 2009 1:55 PM
and press
Press
The next step is to choose the behavior of your photocell.
Step 5: Press
EXTERI OR
The next step is to define a Delay Time.
Delay Time
•
based on changing conditions in the environment. For
example, clouds passing the sun which temporarily darkens
the space. I t is expressed in minutes and represents the
length of contiguous time between trigger points in order for
the relays to be turned on or off.
Step 6: Use the numeric keypad to enter a delay time, and press
Select/ Save.
Step 7: Press
0-10 Volt or Switched), and press
I f you choose 0-10 VOLT you will be prompted to provide a
minimum activation (ON) voltage and a minimum OFF voltage
setting.
or to change the field to PHOTOCELL.
Select/ Save.
SELECT INPUT
2: PHOTOCELL
or to select the behavior
Select/ Save.
, and press
PHOTOCELL
INTERIOR
—used to prevent rapid changes to lighting
PHOTOCELL
DELAY TIME:
or to select the type of photocell (either
PHOTOCELL TYPE
0-10 VOLT
EZ-MAX Plus Quick Start Guide
I NTERI OR
5 M
Select/ Save.
Page 28
or