Leviton EZ-MAX Plus 8 Quick Start Manual page 13

EZ-MAX Plus QuickStart.book Page 13 Thursday, January 22, 2009 1:55 PM
Configuring Blink Warn Parameters
Step 1: Press the
Step 2: I f you aren't at the default screen, press
the display reads as shown below, then press
SELECT/ SAVE.
Step 3: Press
press
Step 4: Press
keypad to enter a specific time. Press
Step 5: Press
Warn, or use the keypad to enter a specific time. Press
SELECT/ SAVE.
Step 6: Press
TI ME). or use the keypad to enter a specific time. Press
SELECT/ SAVE.
Page 13
MENU
button.
MAIN MENU SELECT
SYSTEM SETTINGS
until the display reads GLOBAL TI MERS, then
SELECT/ SAVE.
SYSTEM SETTINGS
GLOBAL TIMERS
or to adjust the FLASH TI ME. or use the
BLINK WARN
FLASH TIME: 0.3 S
or to adjust the TI ME OUT setting for Blink
BLINK WARN
TIME OUT:
or to adjust the Override Time (OVRD
BLINK WARN
OVRD TIME:
EZ-MAX Plus Quick Start Guide
or
SELECT/ SAVE.
5M
120M
until