Leviton EZ-MAX Plus 8 Quick Start Manual page 26

EZ-MAX Plus QuickStart.book Page 26 Thursday, January 22, 2009 1:55 PM
Step 3: Press
Select/ Save
Step 4: Use the numeric keypad to enter the input number for
the occupancy sensor. Press
field, and press
Press
The next step is to choose the behavior of your occupancy
sensor.
Manual ( Manual On-Auto Off)
•
turn off the assigned relays when the occupancy sensor
indicates an unoccupied state. When the room becomes
occupied, the relays will not be automatically turned on,
instead, the user will have to manually turn on the lights from
a wall switch or other input.
Auto ( Alw ays On/ Auto Off)
•
Sensor will turn the assigned relays both on and off based on
either an occupied or unoccupied stated indicated by the
occupancy sensor.
Step 5: Press
EXTERI OR
Step 6: Assign the relay (or relays) to this occupancy sensor.
Press
use the numeric keypad to enter a relay number. Press
or to navigate to LV I NPUT, and press
.
INPUT TYPE
LV INPUT
or
Select/ Save.
SELECT INPUT
2: OCC
or to select the behavior
Select/ Save.
, and press
OCC SENSOR MODE
INTERIOR
or to cycle through the relay numbers, or
EZ-MAX Plus Quick Start Guide
to navigate to the next
to change the field to OCC.
—The occupancy sensor will
—I n this mode, the Occupancy
I NTERI OR
or
Page 26