goodnature X-1 MINI PRO Owner's Manual page 9

Section 4:
1
Insert the Bottom Press Rack into
the Press Chamber, by sliding it
down from the top of the chamber
until it drops in place.
4
Place the Moving Platen snugly into
the back of the Press Chamber, with
the grooves facing toward the front
of the press.
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Setup
2
Slide the Front Press Rack into
place. The round cutouts on the top
edge should go around the pins in
the Press Chamber.
5
Place FreshFilter® Press Bag in the
Press Chamber.
3
Place the Press Chamber snugly
into the front of the press.
6
Push each side of the FreshFilter®
Press Bag over the Bag Pins, so the
pins are protruding through the
bag.
09
25