goodnature X-1 MINI PRO Owner's Manual page 11

Section 4:
1
With the Grinder in the UP
position, attach the Press Guard.
4
Screw the Agitator Knob onto the
threaded rod until snug. Do not
over-tighten.
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Setup
2
Lower the grinder to the DOWN
position.
5
Place the Grinder Ring into the
Grinder, making sure "TOP" is at
the top of the grinder, facing up.
3
Place the Grinder Disc into the
Grinder. Align pins with pin holes.
Use caution when handling Grinder
Disc assembly.
6
Insert the orange hopper seal
into the groove on the base of the
hopper.
11
25