goodnature X-1 MINI PRO Owner's Manual page 16

Section 6:
When the power switch is first turned on, the lights around the Control Buttons will illuminate for the first
2 seconds according to the following:
- Shred Light indicates the machine is powered
- Batch Light indicates the grinder is in the lowered position with the clear plastic press guard installed.
- Single Light indicates the hopper and hopper door are both installed and in the lowered position
SHRED
When the hopper door is opened to add produce, the grinder will come to a stop automatically and the "SHRED" light
Drop
will blink. The shred cycle will restart automatically once the door is closed. If the hopper door is open for more than 45
seconds, the shred cycle will cancel and the light will no longer be illuminated.
As a safety feature, the grinder disc will stop spinning and the "SHRED" button will flash while the hopper door is open.
Drop
Press the "SHRED" button a second time to stop grind cycle. Alternatively, the "STOP" button can be pressed to stop the
Drop
grinder.
If the hopper is open for more than 45 seconds, the grind cycle will cancel automatically as a safety feature.
Drop
When the hopper door is closed, the grinder disc will begin spinning again.
Drop
Solid illuminated "SHRED" button means the grinder disc is spinning.
Drop
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Operation
POWER SWITCH
The power switch is located on the bottom of the machine
towards the front.
Power switch controls power to both the grinder and press.
Engage power switch by switching to the "on" position.
16
25