Press Operation - goodnature X-1 MINI PRO Owner's Manual

Section 6B:
12
Before pressing, check to make sure the bag is filled evenly and is not over-filled.
13
Press the "SINGLE" button if you are pressing a small amount of produce (about 1.5 lb or less), or press the
"BATCH" button if you are pressing a larger amount of produce.
•
Pro tip: When the hopper is mostly empty, the pusher will make contact with the agitator producing an audible 'tap'
sound. This will indicate the hopper is clear.
14
The single cycle will take roughly ninety (90) seconds, and the batch press will take roughly 4 minutes to run a full
cycle. The press will stop automatically when the cycle is finished.
15
At the end of the cycle, rotate the grinder to the "up" position, then push the
moving platen back. Pull the press bag off of the pins and remove from the
press chamber.
16
You have now completed one full shred and press cycle.
17
When you are finished, turn the power switch to the "OFF" position.
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS

Press Operation

19
25