Grinder Operation - goodnature X-1 MINI PRO Owner's Manual

Section 6A:
1
Ensure machine is properly assembled and ready for operation according
to Section 4: Setup.
2
Prop open the hopper door using the pusher handle as shown in the image
below.
3
Fill the hopper with desired amount of produce.
4
Close the hopper door using the pusher handle.
5
Press the "SHRED" button. This will start the grind cycle.
6
Lightly apply pressure to the pusher. The produce will grind slowly into the press bag. Some vibration in the
grinder and pusher is normal.
7
If it seems that the pusher is not making any progress, pull back the pusher and apply a couple quick, firm thrusts
until the blockage is cleared.
8
Intermittent and gentle pushing is more effective than steady pushing.
9
When the hopper is mostly empty, the pusher will make contact with the agitator producing an audible 'tap' sound.
This will indicate the hopper is clear.
10
Open the hopper door again and repeat the process, grinding produce until the desired amount is in the press
chamber.
11
Once you have finished grinding the desired amount of produce for one press cycle, press the "SHRED" button
again to turn off the grinder.
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS

Grinder Operation

18
25