goodnature X-1 MINI PRO Owner's Manual page 12

Section 4:
7
Attach the Hopper to the Grinder
by aligning the pin on the Hopper
with the black hook on the Grinder
and push down firmly.
10
Push the handle of the Pusher
through the Hopper Door.
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Setup
8
Clamp the Hopper in place using
the clips on each side.
11
Place Hopper Door down onto the
receiver.
9
Insert the rubber Splash Guard
into the Hopper Door.
12
After the Hopper is secured with
the clips and is in the down position,
place the Hopper Door down into the
receiver so that the rear portion of
the door is located as shown. You will
notice there is still a gap between door
and grinder housing.
12
25