goodnature X-1 MINI PRO Owner's Manual page 13

Section 4:
13
Push firmly down with two hands
onto the rear hinge section of
the Hopper Door until it snaps in
place with an audible "click". This
may take a lot of force on a new
machine.
16
The vibration pad can be placed
under a container of your choosing.
X-1 MINI PRO OWNER'S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Setup
14
The Hopper Door is properly
installed when there is little to no
gap between the Door and Grinder
Housing.
15
Finally, lower the Hopper Door
and Pusher into place, ready for
operation.
13
25