Overview Of Siremobil Compact Parameters; Overview Of Memoskop C / C-E Parameters - Siemens SIREMOBIL Compact Service Instructions Manual

Adjustments / Programs

Overview of SIREMOBIL Compact parameters

Invoke the Moreinfo.hlp help file on the service PC for a short description of the parame-
ters available on the SIREMOBIL Compact.
NOTE

Overview of Memoskop C / C-E parameters

User Setup
•
The User Setup is invoked with the CTRL + U key combination.
•
The available functions are described in the SIREMOBIL Compact Operating
Instructions.
Technical Setup
•
The technical setup is invoked with the CTRL + T key combination.
The following functions can be invoked:
Function:
1. Test pattern generation
2. Video frequency
3. Number of monitors
4. Hardcopy setup
5. Edge 1 coef set
6. Edge 2 coef set
7. Motion detection setup
8. Circle mask setup
Siemens AG
Medical Engineering
If parameters have been changed and saved in the "Adjustments,
Parameter" menu with Save to file, you must exit the service pro-
gram with "Logoff" and "Quit" to save the modified parameters to
the disk.
Comments:
Not for service, invoke the necessary test images on the
service PC.
The currently programmed frame rate is shown in the
parentheses to the right. After downloading the
Memoskop or after replacement, the Memoskop will start
up at the default video frequency (50 Hz).
If the monitors are configured for a different video fre-
quency, you must perform "blind" configuration for the cor-
rect video frequency.
Refer to Configuring video frequency.
Allows you to program the number of monitors used (1 or
2) .
You can configure the connection for hardcopy cameras.
Check whether 5500 is programmed for "4 Max Hardcopy
time" and if not, program this value.
Allows configuration of edge enhancement. Check
whether 3 is programmed and if not, program this value.
Allows Configuration of edge enhancement. Check
whether 8 is programmed and if not, program this value.
Configures the motion detector.
Check if at MD 1: Threshold 100 and at MD 2: Threshold
120 is programmed, if not, program these values.
Allows you to configure the diameter of the circle mask.
Register 5 RXR2-130.061.02
Rev. 03
Page 19 of 22
10.03 CS PS 24
5 - 19
5
5
SIREMOBIL Compact
System Manual