Page 11
All the content in the manual have been checked carefully. If there are any errors in printing or misunderstanding in the content, please contact Midea customer service center. Note: Where there is a technical improvement on the product, it will be included in the new edition of the manual.
It will be not covered to the warranty service if appear the non-original parts be used. 8. Please contact with Midea customer service team for reserve checking and repair service if this is damage on the socket or power cord.
Page 14
Product introduction 1. Tube Handle 2. Quick Release Cord Hook 3. Extension Tube 4. Locking Clip 5. Power Cord (length around 6meters) 6. Hand Vac Handle 7. On/Off Power Switch 8. Dust Cup Container Release Button 9. Cord Winding Hook 10.
Page 15
INSTRUCTIONS FOR USE NOTE: Always remove the plug from the wall socket before adding or taking off accessories. Inserting the metallic tube into the vacuum body. Fig.1 Fig.1 Hold the vacuum cleaner handle, open the clip on the handle Fig. 2 Insert the extension tube until it firmly snaps into place on the handle.
Page 16
Round brush: For curtain, bed, sofa and car Floor Brush: For all types of floors including carpets and tiled Fig.5 floors. Unrolling and rolling up the feeder cord Quick cord release latch This vacuum cleaner has a good design for rolling up the cord and a quick cord release.
Page 17
After usage, roll up the feeder cord around the rolling clasp for easy storage. Usage as a hand vacuum cleaner Detach the extension tube from the vacuum cleaner by unlocking the clip on the handle. NOTE: You may leave the crevice tool or the brush attached to the hand vacuum cleaner when it is thus used.
Page 18
5. Carefully replace the dust filter in specific position. NEVER use the vacuum cleaner without the filter correctly placed. 6. Attach the dust container to the main part of the appliance. Product specification Model VCS861B Rated Voltage 220-240V~ 50/60Hz Rated Power 600W...
Page 19
SOLVING POTENTIAL PROBLEMS Problem Possible cause Possible solutions Push hard on the plug to make sure it is well placed. The male plug may not Check the fuse or be properly plugged cut-off the power and The appliance does not into the wall socket.