Page 9
Two-in-one wireless Vacuum cleaner User manual Model: VC-02A14S *Please carefully read the user manual and all safety notices before you use the product; please properly keep the user manual for you to refer to in the future.
Safety notices ■ Your vacuum cleaner is an electrical tool, and should be used according to the normal usage conditions; please do not allow the vacuum cleaner to be in operation when none uses the vacuum cleaner. ■ Please do not make the dust cleaner be close to a heat source, radiation source or burning cigarette butts, and please make sure the following objects will not be absorbed into the vacuum cleaner, or the dust cleaner may be damaged, fire disaster may be caused, or people may be injured.
*The above product accessories are just for reference; the real product accessories should be subject to the real product purchased instead of the user manual, which may be changed without prior notice. Product technical parameters Product technical parameters Model Voltage Frequency Rated power VC-02A14S 220V~ 50Hz 600W...
Product operation Use the vacuum cleaner Note: please remove the power plug from the socket when you install components on the machine or disassemble components from the machine. Assemble the vacuum cleaner Open the handle buckle of the portable machine, insert the handle bar until the lock block is tightened up.
Page 14
Product operation Operation instructions Note: the suction inlet should be always clear without being blocked, or the motor will overheat and then result in accidents. Power switch The power switch is at two different positions; please press “I” to turn on the dust cleaner, and press “O”...
Product maintenance Maintain the vacuum cleaner Note: for the purpose of achieving the best cleaning effect, please clean the dust container and the container filter after each used. 01Hold the “On” button of the dust container to take the dust container out of the machine.
Troubleshooting and service guideline Common troubles and troubleshooting methods The vacuum cleaner does not work. Possible reason Troubleshooting method The plug does not be correctly Correctly insert the plug into the socket. inserted into the socket The temperature controller of the Turn off the machine, and remove the plug from the motor works.
Need help?
Do you have a question about the VC-02A14S and is the answer not in the manual?
Questions and answers