Related Manuals for Midea VCP6P
Summary of Contents for Midea VCP6P
- Page 1 Quick Start Guide Cordless Cyclone Vacuum Cleaner VCP6P This manual is for reference only, the information has been carefully checked, if there are any discrepancy, the factory specifications shall prevail...
-
Page 2: Product Introduction
Product Introduction Installation and component introduction Main unit Extension tube Electric floor brush Parts List Flat nozzle 2-in-1 brush Storage buckle Storage base Power adapter assembly assembly Electric bed brush Manual Tips When cleaning high places, accessories can be installed on the extension tube. -
Page 3: Functional Operation
Functional Operation Installation and use of storage rack Note 1. Before placing the machine on the storage rack or when the storage rack is left alone, be sure to place it on a horizontal surface to avoid falling and damaging the machine; 2. - Page 4 Functional Operation Installation and use of storage rack 2. Placement of the machine: Before placing the machine on the storage rack assembly, please confirm whether the placement position is horizontal, and make sure that the machine is turned off and stopped working. Place the machine on the position of the storage rack gently as shown in the figure below and leave after the machine is stable.
-
Page 5: Battery Charging
Functional Operation Battery charging Note 1. The battery is not charged when shipped from the factory. Please be sure to fully charge it before use; 2. Do not charge in the environment below 5°C or above 40°C; 3. If the battery power is insufficient during operation, the battery power indicator will flash; 4. - Page 6 Functional Operation Clean up Note 1. To avoid blocking the air duct, please clean up large pieces of garbage in the area first (such as large pieces of paper, packaging film, etc.); 2. Do not use and store the battery in an environment below 5°C or above 40°C; 3.
-
Page 7: Cleaning And Maintenance
Cleaning and Maintenance Dust cup disassembly and cleaning Note To maintain the suction power of the vacuum cleaner, please clean the dust regularly. Dust cup disassembly Place the machine flat as shown, press the main lock button with one hand and take out the dust cup assembly with the other hand. - Page 8 Cleaning and Maintenance Filter disassembly and cleaning Note 1. The parts in the dust cup are washable; 2. Please make sure that all parts are dry before cleaning and installing them back. 1. Hold the ribs on both sides with your 2.
- Page 9 Cleaning and Maintenance Disassembly and cleaning of electric floor brush Note 1. In order to avoid affecting the operation of the electric floor brush, please clean and maintain it when the roller brush or wheels are tangled or dirty. 2. Before disassembling and maintaining, be sure to stop the operation of the electric floor brush;...
- Page 10 Cleaning and Maintenance Electric bed brush cleaning Note 1. When the dust blocks the air duct of the electric bed brush, please use disposable chopsticks to remove it; 2. Except for the bottom cover, the brush can’t be washed with water; 3.
- Page 11 Cleaning and Maintenance Disassembly and cleaning of HEPA Note 1. HEPA should be completely dry before being installed; 2. Do not scrub or apply brute force to the HEPA; 3. When assembling, please make sure that HEPA is installed in place; 4.
- Page 14 VCP6P 25.2 350W 3.9kg 244*228*1104mm...