fantastic furniture Torkay Assembly Instructions Manual page 9

Step 9
You will need:
Phillips Head
2 x Large
Cam Nuts (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
With assistance, attach back panel (P7) to left side (P2). Insert 2 x large cam nuts (H2)
into back panel (P7). Using a phillips head screwdriver, rotate the cam nuts so the
arrow points towards the incoming cam bolt. Turn clockwise to lock.
Step 10
You will need:
Phillips Head
1 x Large
Cam Nut (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach top panel rail (P4) to left side (P2), ensuring the side with cam nut holes
faces inwards. Insert 1 x large cam nut (H2) into top panel rail (P4). Using a
phillips head screwdriver, rotate the cam nuts so the arrow points towards the
incoming cam bolt. Turn clockwise to lock.
fantasticfurniture.com.au
Screwdriver
Screwdriver
(H2)x2
(P2)
(P4)
(H2)
(P2)
(P7)
(P4)
(H2)
Page 9