Summary of Contents for fantastic furniture Toronto
Page 1
Ver sion 1. 2 Toronto Bookcase 2 Drawer fantasticfurniture.com.au...
Page 2
Secure it! Reduce the risk of furniture tip-over accidents WARNING: ENSURE THE WALL STRAP IS ATTACHED TO AVOID SERIOUS INJURY OR DEATH. To avoid any serious or fatal injury, a wall strap has been provided with this product to prevent toppling. We strongly recommend that this product is permanently fixed to the wall or other suitable surface.
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.
What you need to assemble the product Other tools you need : Bookcase Mallet Parts list: Bookcase Hardware pack 4 x Gliders (H1) Please make sure you have all these parts before you start. fantasticfurniture.com.au Page 4...
Page 5
Step 1 You will need 4 x Gliders (H1) Mallet (H1) (H1) (H1) (H1) Gently place the bookcase on it's back. Use the mallet to hammer 4 x Gliders (H1) into the bottom of each leg as shown. Ensure that the glides are placed in the middle of the leg before securing. Page 5 fantasticfurniture.com.au...
Step 2 We strongly advise that you use the wall safety strap provided to prevent the unit toppling Seek advice from a qualified trades person on how to attach safety strap to the wall. Gently stand the bookcase upright and move to it's final position. Attach the safety strap to the wall securely.