fantastic furniture Torkay Assembly Instructions Manual page 13

Step 17
You will need:
Phillips Head
2 x Small
Cam Nuts (H10) Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach 1 x drawer support rail (P15) to drawer front (P10), ensuring the side with the
cam nut hole faces outwards. Insert 1 x small cam nut (H10) into drawer support rail
(P15). Using a phillips head screwdriver, rotate the cam nut so the arrow points
towards incoming cam bolt. Turn clockwise to lock.
Repeat this process for the other drawer support rail (P15).
Step 18
Slide 1 x drawer base (P14) into the grooves on the drawer sides (P11, P12)
and drawer front (P10).
Repeat this process for the other drawer base (P14).
fantasticfurniture.com.au
(H10)
(P14)
(P11)
(P15)
(P10)
X2
with paper lamination
face inside
(P12)
X2
Page 13