fantastic furniture Torkay Assembly Instructions Manual page 10

Step 11
You will need:
Phillips Head
1 x Large
Cam Nut (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach front support rail (P5) to left side, ensuring the side with cam nut holes
faces down. Insert 1 x large cam nut (H2) into support rail (P5). Using a phillips
head screwdriver, rotate the cam nut so the arrow points towards the incoming
cam bolt. Turn clockwise to lock.
Step 12
You will need:
Phillips Head
2 x Large
Cam Nuts (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
With assistance, attach bottom shelf (P8) to left side (P2). Insert 2 x large cam
nuts (H2) into the bottom shelf (P8). Using a phillips head screwdriver, rotate
the cam nut so the arrow points towards the incoming cam bolts. Turn
clockwise to lock.
fantasticfurniture.com.au
Screwdriver
Screwdriver
(P5)
(H2)
(H2)
(P2)
(H2)x2
(P5)
(P8)
Page 10