fantastic furniture Torkay Assembly Instructions Manual page 8

Step 7
You will need:
4 x Wooden
Dowels
1 x Left
Runner Track
1 x Right
Runner Track
Insert 4 x wooden dowels (H3) into centre panel (P6).
Attach 1 x right runner track (H12) to the left side of the
centre panel (P6) using 3 x small screws (H7), tightening
with a phillips head screwdriver.
Turn over the centre panel (P6) and attach 1 x left runner
track (H11) using 3 x small screws (H7), tightening with a
phillips head screwdriver.
Ensure the screws are inserted through the holes shown
in the image above.
Step 8
You will need:
Phillips Head
2 x Large
Screwdriver
Cam Nuts (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Attach centre panel (P6) to back panel (P7). Insert 2 x large cam nuts
(H2) into the centre panel (P6). Using a phillips head screwdriver, rotate
the cam nuts so the arrow points towards the incoming cam bolt. Turn
clockwise to lock.
fantasticfurniture.com.au
Note: the left side of the centre panel (P6) has cam nut holes at the top.
6 x Small
(H3)
Phillips Head
Screwdriver
(H11)
Mallet (soft
(H12)
headed)
(H3)x4
Screws
(H7)
(P6)
(H2)x2
(P7)
first hole
(H12)
(P6)
second hole
(H11)
(H7)
(H12)
Page 8