fantastic furniture Torkay Assembly Instructions Manual page 11

Step 13 Step 13
You will need:
6 x Large
Screw (H4)
Cam Nuts (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
With assistance, attach right side (P3) to the assembled unit. Insert 6 x large cam
nuts (H2) into the top panel rail (P4), front support rail (P5) and bottom shelf (P8).
Using a phillips head screwdriver, rotate the cam nuts so the arrow points towards
the incoming cam bolts. Turn clockwise to lock.
Attach front support rail (P5) to centre panel (P6) using 1 x large screw (H4),
tightening with a phillips head screwdriver.
Step 14
You will need:
4 x Large
8 x Large
Screws (H4)
Cam Nuts (H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
With assistance, carefully turn the assembled unit upright.
Attach top panel (P1) to the unit as shown. Insert 8 x large cam nuts (H2) into the
left and right sides (P2, P3), back panel (P7) and centre panel (P6). Using a phillips
head screwdriver, rotate the cam nut so the arrow points towards incoming cam
bolt. Turn clockwise to lock. Attach top panel rail (P4) to top panel (P1) using 4 x
large screws (H4), tightening with a phillips head screwdriver.
fantasticfurniture.com.au
1 x Large
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(P6)
(P5)
(H4)
(P2)
(P1)
(H2)x8
(P2)
(P3)
(H2)x6
(P4)
(H2)
(H4)
Page 11